Clear-Com V12PDDXY - Manual (Page 101)

Assignment
mode Description / comments
IFB To assign IFB sources and destinations, press the ASSNMT PNL key or
talk button. IFB is displayed on the Reply key, and the Reply key status
LED (lever key) or pushbutton or talk button is lit
red .
PL To make partyline assignments, press the Reply key again (currently
showing IFB).
PL is displayed on the Reply key.
FG To make Fixed Group assignments, press the Reply key again (currently
showing PL).
FG is displayed on the Reply key.
To exit assignment mode all together, press the Reply key again.
Table 25: Assignment menu modes
5.12.1 Assigning IFB sources and destinations
The only valid IFB destinations are Global IFBs with talk.
The only valid IFB sources are sources with listen.
Note:
Normally only one source per destination is configured. If multiple sources for an IFB
destination are required, then the option to assign multiple sources to an IFB from an
assignment panel (AP) must be enabled in ECS / EHX. For more information, see your ECS
/ EHX documentation.
To assign an IFB destination and source:
1. Press the ASSMNT PNL key or talk button. The Reply key status LED (lever key) or
pushbutton or talk button is lit red and IFB is displayed on the Reply key.
Valid IFB destinations are indicated by the status LEDs, pushbuttons or talk buttons
flashing red .
101 V-Series Panels User Guide