beautypg.com

5 supported fonts in v-series panels, Supported fonts in v-series panels – Clear-Com V12PDDXY User Manual

Page 26

background image


3.5 Supported fonts in V-Series panels

Font

Description / comments

Basic Latin

The backslash is a Yen character. This is a size-maximized font (no
descenders, lower-case characters are not relative in size to upper-
case characters). This covers Unicode 32 to 127 (decimal), 0x20 to
0x7F (hex).

The V-Series panel display will support ten characters.

Cyrillic

This is a normal, relatively-sized font. Covers Unicode 1024 to 1279
(decimal), 0x400 to 0x4FF (hex) with some missing characters.

The V-Series panel display will support ten characters.

Hiragana

This covers the codepoint range 12352 to 12447 (decimal), 0x3040
to 0x309F (hex).

The V-Series panel display will support five characters.

Full-width
Katakana

The V-Series panel display will support five characters, as this is a
normal width font.

This covers the codepoint range 12448 to 12543 (decimal), 0x30A0 to
0x30FF (hex) with some missing characters.

Kanji

Displays 17,000 out of the 21,000 characters. This covers the
codepoint range 19968 to 40895 (decimal), 0x4E00 to 0x9FBF (hex).

The V-Series panel display will support five characters.

Hangul

The range is 44032 to 55215 (decimal), 0xAC00 to 0xD7AF (hex).

The V-Series panel display will support five characters.

Half-width
Katakana

The codepoint range is 65376 to 65440 (decimal), 0xFF60 to 0xFFA0
(hex).

The V-Series panel display will support ten characters.

Arabic

The character range supported on the VSeries panel is the Basic
Arabic character set 0x0600 to 0x06FF.

Table 5: Supported fonts

26

V-Series Panels User Guide

This manual is related to the following products: