Clear-Com V12PDDXY - Manual (Page 103)

Figure 119: Rotary panels: Setting the output level
Figure 120: Rotary panels: Setting the input level
5.12.2 Assigning partyline members
Note:
Talk and listen keys are the only valid members of a partyline.
To assign partyline members to a talk or listen key:
1. Press the ASSMNT PNL key or talk button twice, so that PL is displayed on the
Reply key.
All available partyline status LEDs, pushbuttons or talk buttons
flash red .
2. Press the key, pushbutton or talk button for the required partyline.
The key’s status LED or talk button is lit
solid red and all available members’ status
LEDs or pushbuttons flash green . In the case of rotary panels if a talk label is
available the talk button will flash green and if a listen label is available the rotary
encoder will flash green.
103 V-Series Panels User Guide