Clear-Com V12PDDXY - Manual (Page 163)

The components shown in display 2 are as follows:
Component Description / comments
app The panel application version
kernel The µlinux kernel version
rootfs(v)
The version (v) of the kernel root file system
rootfs(d) The date (d) of the kernel root file system
modules The version of the module firmware and bootloader
sound The version of the sound drivers
Table 42: version components in display 2
8.3.2 xpoint
The xpoint command enables you to adjust the values of the crosspoints in the panel’s
audio mixer.
Display 2 displays the output audio stream.
Display 3 shows the input audio stream.
Display 4 shows the value of the crosspoint in dB. A value of -80 signifies no audio, and a
value of 0 signifies all on.
Figure 193: xpoint display
The output streams displayed in window 2 can be scrolled through using the up/down
volume keys under display 2 (lever key and pushbutton panels).
On rotary panels use the rotary control and talk button to scroll through the output streams.
163 V-Series Panels User Guide