Clear-Com V12PDDXY - Manual (Page 88)

The +0 dB represents the output level for the audio source of the label and may be adjusted
using the up and down buttons below the level display or the rotary encoder.
Select the RESET key or talk button to reset the output levels to the default of 0dB.
Pressing the Reply key or Reply key talk button (OUTPUT LEVEL) will return you to the Sort
Group menu.
Note:
When you set the output level for an audio source, you are setting the input levels for the
entire matrix and not just an individual panel.
Input and output settings can only be made for the local matrix. Gains for other matrices can
be achieved within ECS / EHX.
5.7 DIAGNOSTIC menu
The DIAGNOSTIC menu is accessed from the top level menu.
Figure 94: Diagnostic menu for rack mounted panels
Figure 95: Diagnostic menu for desktop panels
88 V-Series Panels User Guide