Clear-Com V12PDDXY User Manual
V-series panels, User guide
This manual is related to the following products:
Table of contents
Document Outline
- 1 Important Safety Instructions
- 2 Introduction
- 3 Overview
- 4 Using the Front Panel Controls
- 4.1 Mic On
- 4.2 Shift Page
- 4.3 Headset Select
- 4.4 Menu
- 4.5 LS Main levels (volume) control
- 4.6 Auxiliary levels (volume) control
- 4.7 Listen Again
- 4.8 Up / Down buttons on lever key and pushbutton panels
- 4.9 Alternative text key
- 4.10 Rotary control on rotary panels
- 4.11 Dial pad (2RU and desktop panels)
- 4.12 Push-To-Talk (PTT) operation
- 4.13 Status LEDs (Tallies)
- 4.14 Communication errors
- 4.15 Lever key panels
- 4.16 Pushbutton panels
- 4.17 Rotary panels
- 5 Using the Menu System
- 5.1 Navigating the menu system
- 5.2 Fast Key Assign
- 5.3 Top level menu
- 5.4 SYS INFO (System Information) menu
- 5.5 LOCAL PREF (Local Preferences) menu
- 5.6 SYS CONFIG (System Configuration) menu
- 5.6.1 PARTY LINE configuration menu
- 5.6.2 FIXED GRP configuration menu
- 5.6.3 LOCAL PNL (Local Panel) configuration menu
- 5.6.4 LOCAL KEYS configuration menu
- 5.6.5 ATTRIBUTES menu
- 5.6.6 REMOTE PNL menu
- 5.6.7 FL CONFIG (Forced Listen configuration) menu
- 5.6.8 INPUT LVLS (Input Levels) configuration menu
- 5.6.9 OUTPUT LVL (Output Levels) configuration menu
- 5.7 DIAGNOSTIC menu
- 5.8 CALL menu
- 5.9 DIAL menu
- 5.10 LOCAL EXCL (Local Exclusive) menu
- 5.11 LOCAL PAGE (Local Page override) menu
- 5.12 ASSNMT PNL (Assignment Panel) menu
- 5.13 SUPERVISE menu
- 5.14 SHIFT menu
- 5.15 Menu map
- 6 IP Configuration
- 7 Installing V-Series panels
- 7.1 Placing panels
- 7.2 Wiring V-Series panels
- 7.2.1 V-Series main panel rear connectors (no AES-3 or T-Adapter)
- 7.2.2 V-Series main panel rear connectors (AES-3)
- 7.2.3 V-Series main panel rear connectors (T-Adapter)
- 7.2.4 V Series expansion panel rear connectors
- 7.2.5 V-Series desktop panel rear connectors (no AES-3 or T-Adapter)
- 7.2.6 V-Series desktop panel rear connectors (AES-3)
- 7.2.7 V Series desktop panel rear connectors (T-Adapter)
- 7.2.8 Mains power cord
- 7.2.9 Power connector wiring
- 7.2.10 Analog matrix to panel wiring
- 7.2.11 Matrix panel GPIO connector wiring
- 7.2.12 Programmable Relay contacts
- 7.2.13 Opto-Isolated inputs
- 7.2.14 Auxiliary audio connector
- 7.2.15 AES-3 option to AES-6 interface card
- 7.2.16 T-Adapter option to DIG-2/DIF-102 interface
- 7.2.17 LAN connector
- 7.2.18 Expansion panel output
- 7.3 Front panel connectors
- 7.4 Mains AC Power
- 7.5 Panel parameters in ECS / EHX
- 7.6 Panel-to-matrix card baud rate
- 8 Maintaining V-Series panels
- 9 Specifications
- 9.1 Front panel controls and connectors
- 9.2 Main panel rear connectors
- 9.3 AES-3 option rear connectors
- 9.4 T-Adapter option rear connector
- 9.5 Expansion panel rear connectors
- 9.6 Panel microphone input
- 9.7 Headset microphone input
- 9.8 Auxiliary loudspeaker output
- 9.9 Audio input/output
- 9.10 AC mains power supply (external)
- 9.11 Temperature
- 9.12 Humidity
- 9.13 Dimensions (1RU panels)
- 9.14 Dimensions (2RU panels)
- 9.15 Dimensions (Desktop panels)
- 10 Glossary