Clear-Com V12PDDXY - Manual (Page 29)

4.7 Listen Again
Note:
The Listen Again feature is configured in ECS / EHX. For more information, see your ECS /
EHX documentation.
Pressing the auxiliary volume control switch momentarily activates the
Listen Again feature. The last stored audio will be replayed (this feature
is configured in ECS / EHX).
Repeatedly pressing the auxiliary volume control will step back through the stored
messages.
4.8 Up / Down buttons on lever key and pushbutton panels
There is a pair of buttons to adjust the volume level on the connection beneath each key
display window on lever key and pushbutton panels (see
Figure 16: Lever key display
window controls and Figure 17: Pushbutton key display window controls ).
Use the left (Down) button to reduce the volume and the right (Up) button to increase the
volume.
You can also use the volume buttons to release a telephone line, in the same way as the
TEL RELEASE function in the diagnostic menu.
To release the telephone line, press both of the Up and Down buttons together.
The label display changes to TEL RELEAS, and the telephone is put back on the hook. All
latched keys on the local system are unlatched, killing all routes to the telephone. After
approximately 5 seconds, the display starts displaying the configured label again.
If the panel does not have Remote Line Release configured, then the call signal is sent to
the label instead.
Note:
The volume buttons are also used to adjust some settings that are accessed through the
panel menu, such as Sidetone Gain.
4.9 Alternative text key
Within the EHX software, you can define alternate text for display on a panel. You can then assign an
Alt Text key on the panel
When selected it will turn red, and inverse video and if alternate text is available for that label the
panel will show this.
Alias, VSM and PM text labels will override whichever state the panel is in.
One possible use of alternate text is to set up a dual language configuration on the panel, for example
to allow panels to display Arabic by default in a particular Middle Eastern broadcast installation.
English speakers could then select the Alt Text key on a panel to see the English equivalents to the
Arabic labels.
29 V-Series Panels User Guide