Clear-Com V12PDDXY - Manual (Page 161)

8.2 Navigating the LLM menu
To change the commands and values use either:
• The up / down buttons under the display.
• The talk or listen lever keys associated with the display.
On a pushbutton panel, the pushbutton can also be used to scroll forwards through
commands and the up button to scroll back through the commands or values.
In rotary panels, pressing the rotary control steps you forward through the commands and
values. Pressing the talk button steps you back through the commands and values.
The numerical value of a command may be changed using either the Main or Aux level
(volume) control.
If a command leads to an action, the relevant display will show DO IT. Pressing any key on
this display actions the command, and the display will change to DONE.
8.2.1 Use of displays
The position of the Local Maintenance Menu (LLM) in the panel display on V-Series panels
is shown below:
Figure 190: Position of Local Maintenance Menu (LLM) on panels
161 V-Series Panels User Guide