Clear-Com V12PDDXY - Manual (Page 108)

The following target panel features can be mimicked or controlled:
• Audio to the target panel.
• Display text.
• Display level control bars.
• Key presses and releases.
• Cross-point level control.
• Microphone gain.
• Loudspeaker cut.
• Head-set select.
• Microphone mute.
• Side-tone control
General purpose inputs and outputs are not mimicked or remotely controllable as they may
not be connected to the same hardware on the supervisor and target panels.
In particular, some of the general-purpose inputs and outputs have dedicated functions on a
Supervisor Panel. Busy Feedback is not mimicked.
Pushbutton panels can supervise lever key panels but will not be able to mimic or control
lever key up assignments. Only the lever key down assignments will be supervised.
Exiting supervise mode
To exit Supervise mode, hold down the Menu button on the dial pad for at least 3 seconds.
The key displays on both panels will then return to the normal (non-supervised) state.
Supervisor hot key
A supervisor hot key can be configured in ECS / EHX to enable rapid entry to Supervise
mode. When the supervisor hot key is selected the labels to panels which may be
supervised will flash and the Reply key will display SUPERVISE in highlighted mode.
Pressing the Reply key or Reply key talk button will exit this mode.
108 V-Series Panels User Guide