Clear-Com V12PDDXY - Manual (Page 126)

6.3.5 LOGIN PORT menu
Figure 150: Login port menu for rack mounted panels
Figure 151: Login port menu for desktop panels
Use the CLEAR key to clear the current login port number, and then enter the new login port
number.
In lever key and pushbutton panels, use the up / down buttons to select the digits. For rotary
panels, press the rotary control to select the left digit and the talk button to select the right
digit.
Each time a digit is selected the cursor will advance to the next digit automatically. Pressing
the lever key down or the pushbutton or the rotary control will step back to the previous digit.
When the login port number has been entered exit the menu using the LOGIN PORT key or
talk button.
Note:
The IP port that the panel uses when logging in to a matrix must be the same as the port set
up in ECS / EHX for the matrix to listen for logins.
This may not be the same port number used by the panel to communicate with an IVC-32
card set up in ECS / EHX under Matrix Hardware.
When a panel logs in to a matrix, the matrix sends the IP address of the IVC-32 card and the
port number to use back to the panel.
126 V-Series Panels User Guide