Clear-Com V12PDDXY - Manual (Page 36)

4.17.3 Assignment Panel (AP) mode and the INTERCOM key
Assignment Panel (AP) mode is enabled in ECS / EHX. AP mode enables you to add
members to local partylines (conferences), local Fixed Groups, and route local audio
sources to Global IFBs.
There are three ways to access AP mode on rotary panels:
• Press Menu and then select ASSNMT PNL.
• Press the dial pad 4 key (a shortcut to the ASSNMT PNL menu).
• Press an assigned INTERCOM button.
You can assign a special INTERCOM button to any key on a rotary panel including the
Reply key in ECS / EHX. The position of the INTERCOM key on the panel determines which
buttons are available for making assignments and which remain in intercom mode. This
feature extends to expansion panels, enabling you to perform intercom and assignment
operations simultaneously.
When the INTERCOM key is selected, the panel enters Assignment Panel (AP) mode
without
entering Menu mode. If you select a INTERCOM key that has been placed on an expansion
panel, then the expansion panel (and any other expansion panels in the daisy chain) is
placed in AP mode and can be used normally.
You use the INTERCOM key in exactly the same way as the Reply key in Menu mode when
making assignments.
For detailed information about making assignments, and the appearance of the panel
displays, see 5.12
ASSNMT PNL (Assignment Panel) menu .
For more information about using the dial pad to perform tasks, see
4.11
Dial pad (2RU and desktop panels)
Note:
If the Reply key has not been reassigned in ECS / EHX, the talk button on the Reply key will
also flash when in AP mode, mimicking the INTERCOM key status.
4.17.4 Rotary panel IFB operation
When a rotary panel key is assigned as an IFB source, you can use the rotary control to
adjust the audio level sent from the panel to the destination or the listen level at the panel.
If you latch the call to the IFB destination by momentarily pressing the talk button, you can
adjust the level of the audio sent to the IFB destination by turning the rotary control.
If the call to the IFB destination is not latched (the talk button is held down) the audio level is
adjusted by pressing and turning the rotary control.
36 V-Series Panels User Guide