6 panel-to-matrix card baud rate, Panel-to-matrix card baud rate, 5 page override – Clear-Com V12PDDXY User Manual
Page 159
7.5.5 Page Override
When Page Override is assigned to a label, the audio level at the destination panel(s) is
predetermined.
This function enables you to talk to someone even if their panel volume control is off (if the
destination speaker was off, it will turn on).
The panel speaker output will operate at the predetermined level regardless of the volume
control setting, unless this control is set higher than the predetermined level.
The page volume level can be adjusted from 0 to 10 in steps of 1 with 0 being off and 10
being full volume. The page volume level’s default setting is 5.
Tip:
For information about enabling Page Override, see your ECS / EHX documentation.
7.6 Panel-to-matrix card baud rate
The RS-422 serial data communication between a panel and other devices operates at
19.2 k baud by default.
159
V-Series Panels User Guide