Burkert Type 8635 - Manual (Page 54)

52 - 8635
O
PERATING AND
C
ONTROLLER
F
UNCTIONS
Operating and display elements
The SIDE Control is equipped with a 3-key operating and display element with an LC display. The
functions of the keys are described in the following sections.
Arrow key up Arrow key down
MANUAL / AUTOMATIC key
LED (without function)
Operating levels
Operation of the SIDE Control is done via two operating levels:
• Process operating level
After the device is switched on, the process operating level is active. In this level, you can switch
between the operating modes
AUTOMATIC and MANUAL.
In the AUTOMATIC mode, position or process control run (process control only with the option
process controller). In the MANUAL mode, the valve can be manually opened and closed.
• Configuration level
In the configuration level, you can specify the first commissioning of the basic functions and
configure supplementary functions if needed.
Process operating level Configuration level
Basic
functions Supple-
mentary
functions
MANUAL AUTO-
MATIC
5 sec
End