Burkert Type 8635 - Manual (Page 128)

126 - 8635
O
PERATING VIA THE
HART
HAND TERMINAL
(HART)
Changing the process variables
Via the menu item Digital control in the Main menu, you can specify the 4 ... 20 mA input signal INP
digitally via the HART interface (0% = 4 mA; 100% = 20 mA).
Procedure
Select the menu item Digital control in the Main menu via the operating key or .
Start the function via the operating key . The following message appears.
Confirm with F4 - OK. The entry mask shown appears.
Specify a digital input value between 0 % and 100 %.
Using F4 - ENTER, transmit the value entered to the SIDE Control.
Using F3 - ABORT, quit the entry mask. A message appears as shown below.
By conforming with F4 - OK you return to the Main menu.
Message after quitting Digital control
Message after starting Digital control
Entry mask for the digital input value.