Burkert Type 8635 - Manual (Page 165)

8635 - 163
O
PERATING
S
TRUCTURE
(A
PPENDIX
)
For each message applies:
F1 – [ HELP]: call up a Help text to explain the current HART
parameter
F2 – [ PREV]: scroll backward
F3 – [ NEXT]: scroll forward
F4 – [ EXIT]: quit menu
1 Only with version with process controller.
2 Only with version with APR (Analog Position Repeat)
3 Only with CHARACT = free
4 Menu item only present when SETPOINT = external has been set in menu item P-CONTROL.
5 Menu item only present when P.CO TUNE = activated has been set in menu item P-CONTROL.
6 Menu item only present when P.INP = ON has been set in menu item SIGNAL ERROR.
7 Menu item only present when Binary Out 1 = DEV.X or = LIM.X has been set in menu item OUTPUT.
8 Menu item only present when Binary Out 2 = DEV.X or = LIM.X has been set in menu item OUTPUT.
9 Menu item only present when P-CONTRL = ON has been set in menu item ADD FUNCTION.
1 Day Î entry mask
8 alphanumeric characters
2 Descriptor Î entry mask
16 alphanumeric characters
3 Date Î
entry mask for date
4 Message Î entry mask,
32 alphanumeric characters
5 Final assembly num. Î
entry mask
value between 0 and 99999999
For each message applies:
F1 – [HELP] call up a Help
text to explain the current
HART parameter
F2 – [SEND] send all altered
HART parameters to SIDE
Control (after quitting the
entry mask)
2 Device setup
Model 8 HART parameters 1 Device information 8635
Distributor ...
Manufacturer Bürkert ...
Dev. Id. 0
TAG ...
Descriptor ...
Message ...
Date 01/01/02
Final assembly num. 0
Universal rev. 5
Field dev. rev. 2
Software rev. 16
Poll addr. 0
Num req. Preams 5
1 Tag
2 Descriptor
3 Date
4 Message
5 Final assembly num.