S/hart), Features – Burkert Type 8635 User Manual
Page 17

8635 - 15
S
YSTEM
D
ESCRIPTION
(S/HART)
•
Position sensor
Very high resolution conductive plastic potentiometer
• Microprocessor controlled electronics
for signal processing, control and driving the piezoelectric positioning system; setpoint entry and
power supply are via a 4 ... 20 mA standard signal.
•
Operating elements
The device can be set (configuration and parametrization) locally via three inside keys. An inside, 8-
digit, 16-segment LC display is provided, which can also show the setpoint or actual value.
•
Positioning system
A piezoelectric positioning system serves to drive the valve actuator.
•
Position repeater (option)
via 2 inductive proximity switches (initiators)
•
Electrical interfaces
Cable bushing (M20x1.5) with screw terminals
•
Pneumatic interfaces
G1/4’’ interior thread
•
Housing
Aluminium housing (hard anodized and plastic-coated) with swing-up cover and captive screws.
•
Attachment
to linear actuators to NAMUR recommendation (DIN IEC 534 T6) or to part-turn actuators to
VDI/VDE 3845.
Option: integral attachment to Bürkert continuous valves
Features