Burkert Type 8635 - Manual (Page 41)

8635 - 39
I
NSTALLATION
Transmission of the valve position to the position sensor built into the SIDE Control is via a lever (to
NAMUR).
Add-on kit to linear activator (Id no. 787 215)
(obtainable from Bürkert as an accessory)
Attachment to a continuous valve with linear actuator acc. to NAMUR
Serial
no. Quan-
tity
Designation
1 1 NAMUR attachment bracket IEC 534
2 1 U-piece
3 2 Clamping piece
4 1 Driving pin
5 1 Conical roller
6a 1 NAMUR lever for stroke range 3 - 35 mm
6b 1 NAMUR lever for stroke range 35 - 130 mm
7 2 U-bolt
8 4 Hex screw DIN 933 M8 x 20
9 2 Hex screw DIN 933 M8 x 16
10 6 Lock washer DIN 127 A8
11 6 Washer DIN 125 B 8.4
12 2 Washer DIN 125 B 6.4
13 1 Spring VD-115E 0.70 x 11.3 x 32.7 x 3.5
14 1 Spring washer DIN 137 A6
15 1 Retaining washer DIN 6799 - 3,2
16 3 Lock washer DIN 127 A6
17 3 Hex screw DIN 933 M6 x 25
18 1 Hex nut DIN 934 M6
19 1 Square nut DIN 557 M6
21 4 Hex nut DIN 934 M8
22 1 Guide bushing 6.2 x 9.9 x 15 x 3.5