Burkert Type 8635 - Manual (Page 14)

12 - 8635
G
ENERAL
N
OTES
Warranty conditions
This document contains no
SURPLVHRIJXDUDQWHH . 3OHDVH refer to our general WHUPVRIsales andGHOLYHU\.
The warranty is only valid if the device is used as authorized in accordance with the
specified
application conditions.
Master code (S/HART)
Operation of the SIDE Control (S/HART) can be blocked with a freely selectable user code. Independent
of this, there exists an unchangeable master code with which you can execute all operative actions on
the device. This 4-digit master code is to be found in the Appendix of these operating instructions in the
Chapter Master code (S/HART).
If required, cut out this code and keep it separate from these operating instructions.
ATTENTION!
The warranty covers only faultless condition of the SIDE Control. No liability will be
accepted for consequential damage of any kind that may arise from failure or
malfunctioning of the device.
Warranty
The warranty is only valid if the device is used as intended in accordance with the specified application conditions.