Avaya P130 - Manual (Page 78)

Chapter 6 Avaya P130 CLI
64 Avaya P130 User’s Guide
Erase startup-config Command
Use the erase startup-config command to erase the NV-RAM.
The syntax for this command is:
erase startup-config
Example:
P130-1# erase startup-config
Show erase status Command
Use the show erase status command to show the status of the current erase
startup-config operation.
The syntax for this command is:
show erase status
Example:
P130-N> show erase status
Module : 1
Source file : startup-config
Destination file : startup-config
Host : 0.0.0.0
Running state : Idle
Failure display : (null)
Last warning : No-warning