Ip route configuration commands, Show ip route command, Set ip route command – Avaya P130 User Manual
Page 111: Show ip route command set ip route command, Age 97
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide
97
IP Route Configuration Commands
Show ip route Command
Use the
show ip route command to display IP routing table entries.
The syntax for this command is:
show ip route
Example:
P130-N> show ip route
Destination Gateway
----------- -----------
149.49.1.1 172.20.22.201
190.20.0.0 172.20.22.202
172.20.0.0 172.20.22.96
Set ip route Command
Use the
set ip route command to add IP addresses to the IP routing table.
The syntax for this command is:
set ip route
Example:
This example shows how to add a default route to the IP routing table:
P130-1# set ip route 149.49.48.0 192.122.173.42
Route added.
IP address of the network, or specific host to be added
IP address of the router.