Avaya P130 - Manual (Page 60)

Chapter 6 Avaya P130 CLI
46 Avaya P130 User’s Guide
The syntax for this command is:
set time client [enable | disable]
Example:
P130-1(super)# set time client enable
Time client mode enable.
P130-1(super)# set time client disable
Time client mode disabled
Set time server Command
Use the set time server command to set the IP address for the time server.
The syntax for this command is:
set time server
Example:
P130-1(develop)# set time server 1.2.3.4
The Server Ip has been set to 1.2.3.4
Show time parameters Command
Use the show time parameters command to display the current settings for all
time related parameters.
The syntax for this command is:
show time parameters
Example:
P130-1(develop)# show time parameters
Client status: Enabled
Current time : 03:43:43 04 JUL 2002 UTC
Timezone set to 'UTC', offset from UTC is 0 hours
Time-Server : 1.2.3.4
Time acquired from Time-Server: 149.49.54.192
Time protocol set to : TIME protocol