Show running-config command, Show startup-config command, Show stack-config command – Avaya P130 User Manual
Page 69
Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide
55
Show running-config Command
Use the
show running-config command to display the currently running
configuration of the module.
This command applies to Policy only.
The syntax for this command is:
show running-config
Example:
P130-N> show running-config
! Avaya P130 Switch-Multilayer Policy configuration
! version 2.9.1
P130-N>
Show startup-config Command
Use the
show startup-config command to display the startup configuration of
the module.
This command applies to Policy only.
The syntax for this command is:
show startup-config
Example:
P130-N> show startup-config
! Avaya P130 Switch-Multilayer Policy configuration
! version 2.9.1
P130-N> P130-1(super)#
Show stack-config Command
Use the
show stack-config command to display the stack configuration.
The syntax for this command is:
show stack-config
Example:
P130-N> show stack-config
!#*******************************************************
!# Upload time: 11:11:33 31 JAN 2001 GMT
!# System description:
Avaya Stack of P130 workgroup switches
!# IP address, netmask: 149.49.48.109, 255.255.255.0
!# Master module #: 1