Avaya P130 - Manual (Page 133)

Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 119
Policy-based Networking Commands
Show access-group Command
Use the show access-group command to see information about the configured
active access list.
The syntax for this command is:
show access-group
Example:
P130-N> show access-group
access-group 100
Show ip access-lists Command
Use the show ip access-lists command to see all the current policy lists.
The syntax for this command is:
show [ip] access-lists
Example:
P130-N> show ip access-lists
The current policy source is local
List 100 status is unkown(0)
ip access-list 100 1 fwd5 tcp
any
any range 500 503
ip access-list 100 2 fwd5 tcp
host 149.49.0.0
host 157.48.0.0 range 2000 2007
ip access-list 100 3 fwd7 udp
any
any eq 25
default action for list 100 is permit