Avaya P130 - Manual (Page 36)

Chapter 4 Installation and Setup
22 Avaya P130 User’s Guide
Rack Mounting
The P130 case fits in most standard 19-inch racks. P130 is 2U (88mm, 3.5”) high.
Place the P130 in the rack as follows:
1
Snap open the hinged ends of the front panel to reveal the fixing holes.
2 Insert the unit into the rack. Ensure that the four P130 screw holes are aligned
with the rack hole positions as shown in Figure 4.6.
Figure 4.6 Avaya P130 Rack Mounting
3 Secure the unit in the rack using the screws. Use two screws on each side. Do
not overtighten the screws.
4 Snap closed the hinged ends of the front panel.
5 Ensure that ventilation holes are not obstructed.