Avaya P130 - Manual (Page 100)

Chapter 6 Avaya P130 CLI
86 Avaya P130 User’s Guide
CAM Commands
Clear cam Command
Use the clear cam command to delete all entries from the CAM table.
The syntax for this command is:
clear cam
Example:
P130-1# clear cam
CAM table entry cleared.
Show cam Commands
Use the show cam commands to display the CAM table entries for a specific port or
MAC Address.
The syntax for this command is:
show cam [[/]]
and
show cam mac
Example:
P130-N> show cam 1/1
Dest MAC/Route Dest Destination Ports
------------------- -----------------
00-40-0d-59-03-78 1/1
00-d0-79-0a-0a-da 1/1
00-40-0d-43-1e-e9 1/1
etc...
P130-N> show cam mac 00-40-0d-88-06-c8
Dest MAC/Route Dest Destination Ports
------------------- -----------------
00-40-0d-88-06-c8 1/1
Total Matching CAM Entries Displayed = 1
Module number
Number of the port on the module
MAC address