Avaya P130 - Manual (Page 148)

Appendix B Specifications
134 Avaya P130 User’s Guide
Interfaces
• P133T
— 24 x 10/100BASE-TX RJ45 port connectors.
— RS-232 for terminal setup via RJ45 connector on front panel.
• P133F2
— 24 x 10/100BASE-TX RJ45 port connectors.
— Two 100FX connectors.
— RS-232 for terminal setup via RJ45 connector on front panel.
• P133G2
— 24 x 10/100BASE-TX RJ45 port connectors.
— Two SFP Gigabit transceiver housings for SFF/SFP mini GBIC.
— RS-232 for terminal setup via RJ45 connector on front panel.
• P134G2
— 48 x 10/100BASE-TX RJ45 port connectors.
— Two SFP Gigabit transceiver housings for SFF/SFP mini GBIC.
— RS-232 for terminal setup via RJ45 connector on front panel.
• P133GT2
— 24 x 10/100BASE-TX RJ45 port connectors.
— Two 100/1000BaseT RJ45 port connectors.
— RS-232 for terminal setup via RJ45 connector on front panel.
Basic MTBF
Safety
• UL for US approved according to UL195O Std.
• C-UL(UL for Canada) approved according to C22.2 No.950 Std.
• CE for Europe approved according to EN 60950 Std.
• Laser components are “Class 1 Laser Products”:
— EN-60825/IEC-825-1 for Europe
— FDA 21 CFR 1040.10 and 1040.11 for USA.
• Overcurrent Protection: A readily accessible listed safety-approved protective
device with a 16A rating must be incorporated in series with building
installation AC power wiring for the equipment under protection.
P133T 331,901 hrs minimum
P133F2 215,597 hrs minimum
P133G2 253,386 hrs minimum
P134G2 223,815 hrs minimum
P133GT2 278,316 hrs minimum