Avaya P130 - Manual (Page 59)

Chapter 6 Avaya P130 CLI
Avaya P130 User’s Guide 45
Set timezone Command
Use the set timezone command to assign a timezone name and set the time
difference of your P130 relative to the Coordinated Universal Time (UTC / GMT).
The minutes parameter can only be set to 30.
The syntax for this command is:
set timezone
Example:
P130-1# set timezone GMT -3:30
Timezone set to 'GMT', offset from UTC is -3:30 hours
Clear timezone Command
Use the clear timezone command to return the timezone to its default,
Coordinated Universal Time (UTC).
The syntax for this command is:
clear timezone
Example:
P130-1# clear timezone
Timezone name and offset cleared.
Set time protocol Command
Use the set time protocol command to set the protocol for use in the system as
either SNTP protocol or time protocol.
The syntax for this command is:
set time protocol [sntp-protocol|time-protocol]
Example:
P130-1# set time protocol sntp-protocol
The protocol has been set to SNTP protocol
P130-1# set time protocol time-protocol
The protocol has been set to TIME protocol
Set time client Command
Use the set time client command to enable or disable the Time Client mode.