Rmon commands, No rmon history command, No rmon alarm command – Avaya P130 User Manual
Page 122: No rmon event command, Rmon alarm command
Chapter 6 Avaya P130 CLI
108
Avaya P130 User’s Guide
RMON Commands
No rmon history Command
Use the
no rmon history command to delete an existing RMON history entry.
The syntax for this command is:
no rmon history
No rmon alarm Command
Use the
no rmon alarm command to delete an existing RMON alarm entry.
The syntax for this command is:
no rmon alarm
No rmon event Command
Use the
no rmon event command to delete an existing RMON event entry.
The syntax for this command is:
no rmon event
Rmon alarm Command
Use the
rmon alarm command to create a new RMON alarm entry.
The syntax for this command is:
rmon alarm
rising-threshold
threshold
The alarm index number of this entry (it is advisable to
use the same interface number as your alarm index
number.)
The MIB variable which will be sampled by the alarm
entry.
The interval between 2 samples
Can be set to either delta (the difference between 2
samples) or an absolute value.