Alpha Technologies XM3-HP Series - Technical Manual - Manual (Page 69)

69 017-882-B0-001 Rev. C2 (10/2013)
3.0
Operation
3.4 AlphaAPPs Overview
The AlphaAPPs (applications) card is an optional coprocessor card for the XM3 Power Supply. It
operates as an independent computing system gathering telemetry from the Power Supply, batteries
and the environment. The embedded Alpha APP Operating System and Flash File System provides
the customer with an expandable platform for future software applications. As new applications are
developed, they can be downloaded over the Power Supply cable modem interface.
3.4.1 Display Structure
Technician ID Screen:
To access the APPS screens press the APPS
softkey on the main XM3 menu. The first APP
screen displayed will be the Technician ID
screen (orange denotes a flashing character in
this document).
If the technician wishes to have their visit logged,
they may enter their ID number (up to 999) by
pressing the up and down arrow softkeys and
then press the ENTR softkey. The technician ID
may be bypassed by pressing the ENTR softkey
with an ID of zero.
If a non-zero ID is entered, a confirmation screen
will appear. It shows the ID and the time stamp.
Press ENTR once again to confirm the entry.
The APP main menu screen will appear.
AlphaAPP V1.05.0
ENTER TECH ID : 0
ADJUST VALUE
ENTR ESC
AlphaAPP V1.05.0
TECH ID : 606
12/29/11 23:59:00
ENTR ESC
AlphaAPP V1.05.0
B ATTERY HISTORY
UTILITY PERFORMANCE
ENTR ESC
3.0 Operation, continued