Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, & 508) Setup Programming Guide - Manual (Page 44)

Products Setup Page 5 - 3 5
Special Products Menu (C
ONTINUED
...
FROM PREVIOUS PAGE
)
COPY SPECIAL PRODUCT X TO N
PRESS ENTER IF YOU ARE SURE?
Press ENTER to accept this data.
(press CANCEL to prevent copying data)
TMP CTYPE (Temperature Compensation Type) Press M2 key.
TEMPERATURE COMPENSATION TYPE N Press UP/DOWN ▲ ▼ to choose a type.
API 6B/54B
API 6C/54C
(changes API GRAV to DENSITY)
API 6A/54A Press ENTER to accept this data.
API GRAV Press M3 key.
API GRAVITY N
+63.5000
0.0 to 100.0
Use keypad to enter the API gravity.
Press
ENTER to accept this data.
DENSITY Press M3 key.
DENSITY N
+63.5000
500 to 2000
Use keypad to enter the DENSITY.
Press
ENTER to accept this data.
API ALPHA Press M4 key.
API ALPHA N
+600.000
270 to 930.0
Use keypad to enter the API alpha.
Press
ENTER to accept this data.
The following menu items appear only with the
optional: SCALD (Statistical Continuous Auto-
matic Leak Detection) tank leak testing program
– WHEN – a special product type is selected,
otherwise disregard the items below.
VAPOR A Press M1 key.
VAPOR A N
+12.1010
5.0 to 20.0
Use keypad to enter Vapor A in degrees Rankine.
Press ENTER to accept this data.
VAPOR B Press M1 key.
VAPOR B N
+8907.00
2000.0 to 15000.0
Use keypad to enter Vapor B in degrees Rankine.
Press ENTER to accept this data.
MOLE WGHT Press M3 key.
MOLE WEIGHT N
+130.000
50.0 to 200.0
Use keypad to enter mole weight in degrees Rankine.
Press ENTER to accept this data.
NOTE
☞