Franklin Fueling Systems Tank Sentinel (TS-1001, 2001, 504, & 508) Setup Programming Guide - Manual (Page 126)

21 Page 21 - 6 Tank Sentinel Setup Programming Guide
DATA MODE Menu (Continued... )
AUTODIAL Press M2 key.
DATA AUTODIAL
NUMBER 1 (Automatically dials up to 4 numbers
NUMBER 2 when Deliveries, Alarms or Leaks occur.)
NUMBER 3 Program numbers below:
NUMBER 4
(N = number 1, 2, 3, or 4)
DATA NUMBERS N
ACCESS CD (Use the Access Code field when
ACCESS CODE N phone number is longer than 12
characters - see example)
blank 12 characters
Use keypad to input access code.
Press
ENTER to accept this data.
PHONE NUM (Input the phone number to autodial)
PHONE NUMBER N
blank
12 characters
(if more than 12 characters - see example)
Use keypad to input phone number.
Press
ENTER to accept this data.
REDIAL EN (ENABLED allows re-dialing of the phone number)
REDIAL ENABLE N
DISABLED
Use UP/DOWN ▲ ▼ to show choices.
ENABLED Press ENTER to accept this data.
— Press the CANCEL key to return to the DATA AUTODIAL Menu —
— Press the DOWN ▼ key to show more menu items —
— continued on the next page —
ACCESS CODE or PHONE No. AT Command Characters:
D = ( , ) comma = Dial Delay
Example — 88 DD 88 DD 9 1 2072830156 (20 character phone number)
‘Switching code’= 88 Dial Delays= DD
“to dial out”= 9 “long distance”= 1
Access Code: 88 DD 88 DD 9 1 (10) Phone Number: 2072830156 (10)