Extron Electronics VN-Matrix 250 User Guide - Manual (Page 99)

Encode
Config MENU NEXT
MENU
NEXT
OSD
MENU
MENU
MENU
MENU
MENU
Network
NEXT
Reset
NEXT
Test
Pattern NEXT
EDID
NEXT
Input
NEXT
See
See
See
See
See
See
See
MENU
Exit Menu
Press Next
MENU
NEXT
Exit menu and return to default screens
Figure 75. VNE 250 Encoder — Top Level LCD Menu
Encode Config Sub-menu
The Encode Config sub‑menu allows you to enable or disable streaming.
Encode
Config MENU NEXT
Stream
[Enable]
NEXT
Enable or
Disable
Figure 76. VNE 250 Encoder Encode Config Sub-menu
1. From the Encode Config screen, press Next to open the Stream window.
2. Use either rotary encoder to toggle between Enable and Disable.
3. Press Next to save the selected values and return to the main Encode Config screen.
4. Press Menu to open the main OSD screen.
Encode Config sub-menu on page 93.
OSD sub-menu on page 94.
Network sub-menu on page 94.
Input sub-menu on page 96.
EDID sub-menu on page 97.
Test Pattern sub-menu on page 98.
Reset sub-menu on page 99.
VNM 250 • Front Panel Menu Configuration 93