Extron Electronics VN-Matrix 250 User Guide User Manual
Page 116
2.
In the
Reset Options screen, use the right rotary encoder to select which type of reset
you want. You can choose
Factory IP or Sanitize:
Factory IP — restores the following parameters to the factory default:
z
IP address
z
Subnet mask
z
Gateway IP address
z
Controller IP address
z
Link speed set to auto
z
Static IP address
z
Controller port number
For factory default values see
on page 24.
Sanitize — runs the sanitize process to overwrite volatile scaler memory (for the
on‑screen display), volatile Wavelet memory, and all non‑volatile memory. All these
memory locations are overwritten three times:
z
Firstly with a random pattern of zeroes and ones.
z
Secondly with binary zeroes.
z
Thirdly with binary ones.
3.
Use the left rotary encoder to toggle between
Activate or Cancel.
4.
Press
Next.
5.
If you selected
Activate in step 3, one of the reset processes runs. The screen shows
System Reset in Progress.
6.
When the reset is complete, press
Next to return to
(see
page 102).
VNM 250 • Front Panel Menu Configuration
110