Extron Electronics VN-Matrix 250 User Guide - Manual (Page 108)

Decode Config Sub-menu
The Decode Config sub‑menu allows you to:
z
Enable or Disable decoding.
z
Enable or Disable the splash screen.
Decode
MENU NEXT
Select Stream
[Available streams]
NEXT
NEXT
Splash
[enable]
Select None or
choose from list of
available streams
Figure 85. VND 250 Decoder Decode Config Sub-menu
1. In the main Decode screen, press Next to open the Select Stream screen.
2. Use either rotary encoder to select None or choose one of the streams that is available
on the network.
3. If you have selected a stream, press Next to save the selection and return to the main
Decode screen. Go to step 6.
If you selected
None or the selected stream is not currently available, press Next to
open the Splash Screen.
NOTE: If a stream was selected and that stream is currently available, the Splash
Selection screen is not available.
4. If the Splash Screen is open, use either rotary encoder to toggle between Splash
enable and Splash disable:
z
Select enable to show the splash screen.
z
Select disable to show a frozen screen capture of the last frame displayed.
5. Press Next to return to the main Decode Config screen.
6. Press Menu to open the main OSD screen.
VNM 250 • Front Panel Menu Configuration 102