Extron Electronics MS9500 HD FrEND Plus - Manual (Page 68)

MS9500GL HD FrEND Plus Chapter 12: Remote Control Protocols
The Player will respond with:
OK or ERROR
GetOutputMode
This command is used to get the current output mode for the player. The Player will respond with:
OutputMode
String is taken from the Output mode table.
GetOutputResolution
This command is used to retrieve the current output resolution and frequency for the player.
The Player will respond with:
OutputResolution
Where string contains an entry from the Output resolution table and number contains an entry from the
frequency table (below). Example: outputresolution 1 1920 1080 “i” 59
SetOutputResolution
This command is used to set the output resolution and frequency for the player.
is taken from the resolution table and must be a valid return option from the GetOutputResolution
command.
is taken from the frequency table and must be a valid frequency for the output resolution.
The resolutions (except video) must have either an I or P appended to the name to indicate Interlace or
Progressive.
Example: setoutputresolution 1 1920 1080 i 59 (string = resolution; from the table) (number = frequency; from
the table)
Resolution Description Freq.
50
Freq.
59.94
Freq.
60
720x480 X X
720x576 X
1024x768 X
1280x720 X X X
1920x1080 X X X
The Player will respond with:
OK or ERROR
64 Rev. 1.26