Extron Electronics MS9500 HD FrEND Plus - Manual (Page 28)

MS9500GL HD FrEND Plus Chapter 2: Player Configuration - LCD
• System Time – Enter the time required using the encoder, select OK and press to save. ‘System
Date’ window appears.
• System Date – Enter the required date using the encoder, select OK and press to save. The display
reverts to the System menu page.
Computer name
Use this menu to give the player (computer) a unique name for use with your control system:
1. Select ‘Computer Name’ a ‘qwerty’ keyboard display opens
2. Use the encoder to select and enter the characters (press for each character) for the new name
3. Select ‘Enter’ and press
4. Restart the MS9500GL
5. Navigate to MENU/System/Computer Name. The new name will be displayed.
LCD Timeout
Set the length of time the display will stay on when not in use; choose from:
• 1 Minute, 3 minutes, 5 minutes, 10 minutes, Never
Factory Defaults
Use this feature to revert the Player to its factory settings.
Field Order
• Normal – Screen is ‘redrawn’ Odd horizontal lines first
• Reverse- Screen is ‘redrawn’ Even horizontal lines first. This setting may be required with some ‘non-
standard’ encoded video files.
Lock
Use this menu to assign a PIN number to the MS9500GL for security. This number will be required to use the
LCD control on reboot.
1. Press over one of the four number in the display
2. Use the encoder to adjust the value and press
3. Select OK and press the display reverts to the main menu and the PIN is set.
Help
Use this menu to access useful information about the MS9500GL and to perform software updates when available.
• Version - Displays the current software version on MS9500GL
• Update – This function will allow for updates to the system and is controlled with a special PIN number
to prevent accidental use. It will start the boot loader program and should not part of normal use.
24 Rev. 1.26