Extron Electronics MS9500 HD FrEND Plus - Manual (Page 35)

MS9500GL HD FrEND Plus Chapter 3: Player Configuration – HD Application
The Driver Statistics window is used for information only.
The Configurations Menu
Select Configurations/Remote Control Configurations to open the Remote Control Wizard.
Note: Refer to ‘Chapter11: Remote Control Configuration for more information.
The Help menu
Select Help/About HD Player to verify the Version of HD Player software on your system.
The About HD Player display:
Click here to
Close
Saving the current configuration
To enable the MS9500GL to “remember” its configuration when the power is turned off and back on,
configuration files are stored on the player hard-disk. These files contain information such as the Playlist (created
by the HD Application), defined remote control methods and startup options.
You may have as many different configuration files as you wish.
These configuration files have the extension. vsf (video player file) files.
To save the current configuration
The current configuration can be saved using the Save As command.
1. Click File/Save As on the main menu. The ‘Save As’ window appears:
2. Enter the name of the file you wish to create (make sure it has a .vsf extension)
3. Click the Save button or hit the ‘enter’ key on the keyboard.
Note: When the HD Player starts up it will automatically load the last saved .vsf file.
31 Rev. 1.26