Extron Electronics MS9500 HD FrEND Plus - Manual (Page 23)

MS9500GL HD FrEND Plus Chapter 2: Player Configuration - LCD
• OFF - File plays to the end and stops
• ON – File plays to the end a repeats until it receives a STOP command.
Play
Press the ‘Play’ to start a paused file from its halt point.
Pause
Press the ‘PAUSE’ icon to halt a file during playback; usually followed by a ‘Play from Pause’ command.
Stop
Press the STOP icon to stop and re-cue a playing file.
Screen On/Off
Press the ‘Screen ON/OFF’ icon to toggle the video output from the player.
• ON – Video is sent to the display device
• OFF – Video output is blanked
Color bars
Press the ‘Color bars’ icon to toggle the color bars output ON/OFF:
• OFF – Normal use
• ON – Color bar output fed to the display device (for setup/testing only)
Audio On/Off
Press the ‘Audio ON/OFF’ icon to toggle the audio output:
• ON – Audio is sent to the sound system (normal mode of use)
• OFF – Audio output is disabled
NOTE: These settings do not affect a file during playback.
Volume
Press the ‘Volume’ icon and the audio level fader appears.
Control for analog audio is provided (digital audio output level is fixed). Analog audio level can be adjusted
between +30dB and –97dB.
Color BCS
Press the ‘Color BCS’ icon and select from:
• Brightness – With the encoder adjust output brightness level from the default then press
• Contrast – Adjust contrast level as above
• Saturation – Adjust saturation (color) as above
Press to return to the previous page (Playback).
19 Rev. 1.26