Extron Electronics MS9500 HD FrEND Plus - Manual (Page 13)

MS9500GL HD FrEND Plus Chapter 1: Introduction/Quick Reference Guide
• HD/DVI output
• Analog and Digital audio output
• Linear Time Code (LTC) features for strict system timing control (MS9500GL only)
• Genlock capable for multi unit synchronous operation (MS9500GL only)
• GPIO signals for enhanced show control (MS9500GL only)
• Windows XP embedded OS
• Support for ESCAN, iMediate and OSD designer.
Installation
The MS9500GL is designed for use in a variety of situations, the most common being ‘desktop’ use.
Rack Mounting
An optional rack mount kit is available from Electrosonic.
1. Secure the Side Brackets to the Rack Panel using four 8-32 screws secured to standoffs (Items 1 in
illustration). Ensure that the mounting flanges face outward.
2. Remove two per side, 6-32 CSK screws (Items 2 in illustration) from the 9500GL unit.
3. Slide 9500GL into the ‘channel’ formed by the two side brackets until the side holes on the unit line up
with those on the side brackets. The 9500GL will protrude through the Rack Panel.
4. Secure the 9500GL to the side brackets with four 6-32 round-head screws (Items 3 in illustration;
supplied with the rack –mount kit).
5. Install the assembly into the equipment rack (2RU required).
9 Rev. 1.26