beautypg.com

Configuring as a timecode reader – Extron Electronics MS9500 HD FrEND Plus User Manual

Page 44

background image

MS9500GL HD FrEND Plus

Chapter 4: Linear Timecode (LTC)

In this mode a cue command is required for the timecode trigger to be activated.

Configuring as a Timecode Reader

The MS9500GL can also be used as a simple timecode reader if verification of incoming timecode is necessary.

Simply select the Receive mode but do not check the Play At option. In this mode the Timecode window will
show the incoming timecode without a clip being played.

40 Rev.

1.26

This manual is related to the following products: