System, Output, Resolution – Extron Electronics MS9500 HD FrEND Plus User Manual
Page 27: Frame rate, Audio, Time/date
MS9500GL HD FrEND Plus
Chapter 2: Player Configuration - LCD
• Stop bits – Select from 1 or 2.
NOTE: The default serial control settings for the MS9500 are Control, 38400, N, 1.
System
Use this menu to access settings for the player video output format etc.
Output
Choose the video output format from the available options:
• RGBHV
• YPrPb
• RGBS
Resolution
Choose the video output resolution from the available options (for more information on frequency rates refer to
table on page 31):
• 1920 x 1080i This is the Default output Mode
• 1280 x 720p
• 720 x 480p
• 720 x 576p
• 1024 x 768
• Reserved 1 (for internal test only; do not select)
Frame Rate
Choose from the available options:
• 47.95 Hz, 48 Hz, 50 Hz, 59.94 Hz, 60 Hz.
Note: The options presented will vary depending upon the Resolution settings (from the previous section).
Audio
Choose from the available options:
• Analog Stereo (RCA sockets)
• SPDIF (RCA socket)
• Audio Off
Time/Date
Set the system Time and Date from this menu:
23 Rev.
1.26