GE Industrial Solutions GE Zenith Series DPB - Manual (Page 35)

27 Installation & Operation Manual, GE Series DPB Busway
March 25, 2013, Rev 0 GE Confidential
DANGER
HAZARD OF ELECTRIC SHOCK, BURN, OR EXPLOSION
Only qualified electrical maintenance personnel should install, operate, service or maintain this
equipment. This document should not be viewed as sufficient for those who are not otherwise
qualified to operate, service, or maintain the equipment discussed.
Turn off power to the busway before installing, removing, or working on this equipment.
Always use a properly rated voltage sensing device to confirm power is off.
The successful operation of this equipment depends upon proper handling, installation, opera-
tion, and maintenance.
Failure to follow these instructions may result in serious injury or death
CAUTION
CLEANING - HAZARD OF EQUIPMENT DAMAGE
Wipe down busway with a dry cloth.
Spray propellants and cleaning or compounds may cause degradation of certain components of
the busway system. Ensure that all cleaning liquids are rated for use on electrical equipment.
Before using products to clean, dry or lubricate components during installation or maintenance,
consult GE.
Failure to follow these instructions may result in equipment damage or personal
injury.
Series DPB Busway Installation & Operation Manual
MAINTENANCE