QTECH QSW-8300 Инструкция по настройке - Manual (Page 85)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
84
2. Configure instance parameters
Command Explanation
Global Mode
spanning-tree mst priority
no spanning-tree mst
priority
Set bridge priority for specified instance.
spanning-tree priority
no spanning-tree priority
Configure the spanning-tree priority of the
switch.
Port Mode
spanning-tree mst cost
no spanning-tree mst cost
Set port path cost for specified instance.
spanning-tree mst port-
priority
no spanning-tree mst port-
priority
Set port priority for specified instance.
spanning-tree mst
rootguard
no spanning-tree mst
rootguard
Configure currently port whether running
rootguard in specified instance, configure the
rootguard port can’t turn to root port.
spanning-tree rootguard
no spanning-tree rootguard
Configure currently port whether running
rootguard in instance 0, configure the
rootguard port can’t turn to root port.
spanning-tree [mst ]
loopguard
no spanning-tree [mst ]
loopguard
Enable loopguard function on specified
instance, the no command disables this
function.
3. Configure MSTP region parameters
Command Explanation
Global Mode
spanning-tree mst configuration
no spanning-tree mst configuration
Enter MSTP region mode. The no command
restores the default setting.
MSTP region mode
show
Display the information of the current running
system.
instance vlan
no instance [vlan
Create Instance and set mapping between
VLAN and Instance.