QTECH QSW-8300 Инструкция по настройке - Manual (Page 163)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
162
no network-address operation of this command cancels the
allocation address pool.
default-router
[[[…]]]
no default-router
Configure default gateway for DHCP
clients. The no operation cancels the
default gateway.
dns-server
[[[…]]]
no dns-server
Configure DNS server for DHCP clients.
The no command deletes DNS server
configuration.
domain-name
no domain-name
Configure Domain name for DHCP
clients;
the “no
domain-name
”
command deletes the domain name.
netbios-name-server
[[[…]]]
no netbios-name-server
Configure the address for WINS server.
The no operation cancels the address for
server.
netbios-node-type {b-node|h-node|m-node|p-
node|}
no netbios-node-type
Configure node type for DHCP clients.
The no operation cancels the node type
for DHCP clients.
bootfile
no bootfile
Configure the file to be imported for
DHCP clients on boot up. The no
command cancels this operation.
next-server
[[[…]]]
no next-server
[[[…]]]
Configure the address of the server
hosting file for importing. The no
command deletes the address of the
server hosting file for importing.
option {ascii | hex |
ipaddress }
no option
Configure the network parameter
specified by the option code. The no
command deletes the network parameter
specified by the option code.
lease { days [hours][minutes] | infinite }
no lease
Configure the lease period allocated to
addresses in the address pool. The no
command deletes the lease period
allocated to addresses in the address
pool.
Global Mode
ip dhcp excluded-address
[]
no ip dhcp excluded-address
[]
Exclude the addresses in the address
pool that are not for dynamic allocation.