QTECH QSW-8300 Инструкция по настройке - Manual (Page 49)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
48
2. Configure link monitor
3. Configure remote failure
Command Explanation
Port mode
ethernet-oam link-monitor
no ethernet-oam link-monitor
Enable link monitor of EFM OAM, no
command disables link monitor.
ethernet-oam errored-symbol-period {threshold
low | window }
no ethernet-oam errored-symbol-period
{threshold low | window }
Configure the low threshold and
window period of errored symbol period
event, no command resotores the
default value. (optional)
ethernet-oam errored-frame-period {threshold
low | window }
no ethernet-oam errored-frame-period {threshold
low | window }
Configure the low threshold and
window period of errored frame period
event, no command resotores the
default value.
ethernet-oam errored-frame {threshold low
frames> | window }
no ethernet-oam errored-frame {threshold low |
window }
Configure the low threshold and
window period of errored frame event,
no command resotores the default
value. (optional)
ethernet-oam errored-frame-seconds {threshold
low | window }
no ethernet-oam errored-frame-seconds
{threshold low | window }
Configure the low threshold and
window period of errored frame
seconds event, no command resotores
the default value. (optional)
Command Explanation
Port mode
ethernet-oam remote-failure
no ethernet-oam remote-failure
Enable remote failure detection of EFM
OAM (failure means critical-event or
link-fault event of the local), no
command disables the function.
(optional)
ethernet-oam errored-symbol-period threshold
high {high-symbols | none}
no ethernet-oam errored-symbol-period
threshold high
Configure the high threshold of errored
symbol period event, no command
restores the default value. (optional)
ethernet-oam errored-frame-period threshold
high {high-frames | none}
no ethernet-oam errored-frame-period threshold
high
Configure the high threshold of errored
frame period event, no command
restores the default value. (optional)