QTECH QSW-8300 Инструкция по настройке - Manual (Page 129)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
128
(2) Set IPv6 Static Routing
Command Explanation
Global mode
ipv6 route
{|
type interface-number> | {
ipv6-address>
interface-number>}} [distance]
no ipv6 route
length> {
address>|
number> |{
}}
[distance]
Configure IPv6 static routing. The no command
cancels IPv6 static routing.
2. IPv6 Neighbor Discovery Configuration
(1) Configure DAD Neighbor solicitation Message number
Command Explanation
Interface Configuration Mode
ipv6 nd dad attempts
no ipv6 nd dad attempts
Set the neighbor query message number sent in
sequence when the interface makes duplicate
address detection. The no command resumes
default value (1).
(2) Configure Send Neighbor solicitation Message Interval
Command Explanation
Interface Configuration Mode
ipv6 nd ns-interval
no ipv6 nd ns-interval
Set the interval of the interface to send neighbor
query message. The NO command resumes
default value (1 second).
(3) Enable and disable router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd suppress-ra
no ipv6 nd suppress-ra
Forbid IPv6 Router Advertisement. The NO
command enables IPv6 router advertisement.