QTECH QSW-8300 Инструкция по настройке - Manual (Page 80)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
79
1. Enable MAC address binding function for the ports
Command Explanation
Port Mode
switchport port-security
no switchport port-security
Enable MAC address binding function for the
port and lock the port. When a port is locked,
the MAC address learning function for the
port will be disabled: the “no switchport
port-security
” command disables the MAC
address binding function for the port, and
restores the MAC address learning function
for the port.
2. Lock the MAC addresses for a port
Command Explanation
Port Mode
switchport port-security lock
no switchport port-security lock
Lock the port, then MAC addresses learned
will be disabled. The
“no switchport port-
security lock
” command restores the
function.
switchport port-security convert
Convert dynamic secure MAC addresses
learned by the port to static secure MAC
addresses.
switchport port-security timeout
no switchport port-security timeout
Enable port locking timer function; the “no
switchport port-security timeout ” restores
the default setting.
switchport port-security mac-address
<mac-address>
no switchport port-security mac-address
<mac-address>
Add static secure MAC address; the “no
switchport port-security mac-address
”
command deletes static secure MAC address.
Admin Mode
clear port-security dynamic [address
<mac-addr> | interface <interface-id>]
Clear dynamic MAC addresses learned by the
specified port.
3. MAC address binding property configuration
Command Explanation
Port Mode
switchport port-security maximum <value>
no switchport port-security maximum
Set the maximum number of secure MAC
addresses for a port; the “no switchport