QTECH QSW-8300 Инструкция по настройке - Manual (Page 326)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
325
Switch(Config)#interface ethernet 1/0/1
Switch(config-If-Ethernet1/0/1)#ulsm group 1 downlink
Switch(config-If-Ethernet1/0/1)#exit
Switch(Config)#interface ethernet 1/0/3
Switch(config-If-Ethernet1/0/3)#ulsm group 1 uplink
Switch(config-If-Ethernet1/0/3)#exit
SwitchC configuration task list:
Switch(Config)#ulsm group 1
Switch(Config)#interface ethernet 1/0/2
Switch(config-If-Ethernet1/0/2)#ulsm group 1 downlink
Switch(config-If-Ethernet1/0/2)#exit
Switch(Config)#interface ethernet 1/0/4
Switch(config-If-Ethernet1/0/4)#ulsm group 1 uplink
Switch(config-If-Ethernet1/0/4)#exit
35.4 ULSM Troubleshooting
With the normal configuration, if the downlink port does not responds the down event of the
uplink port, please enable the debug function of ULSM, copy the debug information of 3
minutes and the configuration information, and send them to our technical service center.