QTECH QSW-8300 Инструкция по настройке - Manual (Page 131)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
130
no ipv6 neighbor <ipv6-address> Delete neighbor table entries.
(9) Delete all entries in IPv6 neighbor table
Command Explanation
Admin Mode
clear ipv6 neighbors Clear all static neighbor table entries.
(10) Set the hoplimit of sending router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd ra-hoplimit Set the hoplimit of sending router advertisement.
(11) Set the mtu of sending router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd ra-mtu Set the mtu of sending router advertisement.
(12) Set the reachable-time of sending router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd reachable-time
Set the reachable-time of sending router
advertisement.
(13) Set the retrans-timer of sending router advertisement
Command Explanation
Interface Configuration Mode
ipv6 nd retrans-timer
Set the retrans-timer of sending router
advertisement.
(14) Set the flag representing whether information other than the address information will be
obtained via DHCPv6.
Command Explanation
Interface Configuration Mode
ipv6 nd other-config-flag
Set the flag representing whether information other
than the address information will be obtained via
DHCPv6.