QTECH QSW-8300 Инструкция по настройке - Manual (Page 305)

+7(495) 797-3311 www.qtech.ru
Москва, Новозаводская ул., 18, стр. 1
304
disable Disable the virtual router.
4. Configure VRRPv3 assistant parameters
(1 ) Configure VRRPv3 preempt mode
Command Explanation
VRRPv3 Protocol Mode
preempt-mode {true| false} Configure VRRPv3 preempt mode.
( 2 ) Configure VRRPv3 priority
Command Explanation
VRRPv3 Protocol Mode
priority < priority > Configure VRRPv3 priority.
( 3 ) Configure the VRRPv3 advertisement interval
Command Explanation
VRRPv3 Protocol Mode
advertisement-interval
Configure the VRRPv3 advertisement interval
(in cent seconds).
(4 ) Configure the monitor interface of VRRPv3
Command Explanation
VRRPv3 Protocol Mode
circuit-failover {vlan <ID>| IFNAME}
<value_reduced>
no circuit-failover
Configure the monitor interface of VRRPv3, the
no operation of this command will delete the
monitor interface.
32.3 VRRPv3 Typical Examples
VRRPv3 Typical Network Topology